Laser Quenching equipment
Perform phase transformation hardening treatment on the metal surface to improve the hardness, wear ...
Perform phase transformation hardening treatment on the metal surface to improve the hardness, wear ...
Used for surface strengthening, repair, and remanufacturing of components, the coating has high adhe...
Flexible processing of complex curved sheet metal parts, with high cutting accuracy, fast speed, and...
Specially designed for seamless welding of precision plastic components, with a small heat affected ...
The plunger of the ceramic press presses the ceramic body under high pressure (≥ 30MPa). The surface of the plunger repaired by traditional welding is rough, with an accuracy error of over 0.1mm, resulting in uneven density of the ceramic body and a service life of only 6-8 months.
The Daokedao laser cladding equipment adopts high-precision cladding technology, with a plunger surface roughness Ra ≤ 0.4 μ m and an accuracy error of ≤± 0.02mm, ensuring uniform density of the ceramic body. High hardness ceramic composite powder is selected, and the hardness of the cladding layer reaches HRC68-70.
The service life of the reinforced plunger has been extended to 2-3 years. After a ceramic enterprise adopted this technology, the qualification rate of ceramic bodies increased by 12%, and the annual loss of waste products was reduced by more than 400000 yuan, which is suitable for the high-precision forming needs of the ceramic industry.
