Laser Quenching equipment
Perform phase transformation hardening treatment on the metal surface to improve the hardness, wear ...
Perform phase transformation hardening treatment on the metal surface to improve the hardness, wear ...
Used for surface strengthening, repair, and remanufacturing of components, the coating has high adhe...
Flexible processing of complex curved sheet metal parts, with high cutting accuracy, fast speed, and...
Specially designed for seamless welding of precision plastic components, with a small heat affected ...
The plunger of the ceramic press presses the ceramic body under high pressure (≥ 30MPa). The surface of the plunger repaired by traditional welding is rough, with an accuracy error of over 0.1mm, resulting in uneven density of the ceramic body, and the welding layer is prone to wear, with a service life of only 6-8 months.
The Daokedao laser cladding equipment adopts high-precision cladding technology, with a plunger surface roughness Ra ≤ 0.4 μ m and an accuracy error of ≤± 0.02mm, ensuring uniform density of the ceramic body. Using high hardness ceramic composite powder, the hardness of the cladding layer reaches HRC68-70, and the wear resistance is 5 times that of traditional welding.
The service life of the reinforced plunger has been extended to 2-3 years, and the qualification rate of ceramic bodies has increased by 12%. After adopting this technology, a certain ceramic enterprise has reduced ceramic waste losses by more than 400000 yuan per year, significantly improving production efficiency.
