Laser Quenching equipment
Perform phase transformation hardening treatment on the metal surface to improve the hardness, wear ...
Perform phase transformation hardening treatment on the metal surface to improve the hardness, wear ...
Used for surface strengthening, repair, and remanufacturing of components, the coating has high adhe...
Flexible processing of complex curved sheet metal parts, with high cutting accuracy, fast speed, and...
Specially designed for seamless welding of precision plastic components, with a small heat affected ...
After the rubber roller shaft of the printing machine wears out, the rubber roller jumps, causing inaccurate printing and an increase in the scrap rate to over 8%. Daokedao adopts nickel phosphorus alloy mirror cladding technology. After repairing the rubber roller shaft neck, the roundness error is ≤ 0.004mm, the matching accuracy reaches IT5 level, and the radial runout of the rubber roller is ≤ 0.005mm. Through low-temperature cladding technology, the substrate temperature rise is less than 80 ℃, avoiding shaft deformation, and the straightness error of the repaired shaft is ≤ 0.01mm/m. The equipment is equipped with a dedicated rotating fixture for rubber roller shafts, which can adapt to different specifications of Φ 50- Φ 150mm. The repair cycle for a single shaft does not exceed 6 hours. After application in a certain printing factory, the printing overlay accuracy increased from 0.1mm to 0.03mm, the scrap rate decreased to 1.5%, and the lifespan of the rubber roller shaft was extended from 12 months to 36 months.
