Laser Quenching equipment
Perform phase transformation hardening treatment on the metal surface to improve the hardness, wear ...
Perform phase transformation hardening treatment on the metal surface to improve the hardness, wear ...
Used for surface strengthening, repair, and remanufacturing of components, the coating has high adhe...
Flexible processing of complex curved sheet metal parts, with high cutting accuracy, fast speed, and...
Specially designed for seamless welding of precision plastic components, with a small heat affected ...
The lip of the plastic blown film machine controls the thickness of the film. The hardness of the lip treated by traditional quenching is low (HRC55-58), and the deviation of the film thickness increases after wear, resulting in holes in the film. The service life of the mold is only 10000-20000 times.
The Daokedao laser cladding equipment uses a micro beam laser to accurately melt the worn part of the lip, with a coating thickness error of ≤± 0.003mm, and the lip flatness is restored to the level of the new mold. Using anti adhesive and wear-resistant alloy powder, the thickness deviation of the film is reduced to ± 0.005mm, and the perforation rate is reduced by 95%.
The service life of the repaired mold head has been extended to 40000 to 50000 mold cycles. After adopting this technology, a plastic packaging enterprise has reduced the film waste rate by 80% and saved more than 250000 yuan in raw material costs annually, which is suitable for the high-precision production needs of the plastic processing industry.
