Laser Quenching equipment
Perform phase transformation hardening treatment on the metal surface to improve the hardness, wear ...
Perform phase transformation hardening treatment on the metal surface to improve the hardness, wear ...
Used for surface strengthening, repair, and remanufacturing of components, the coating has high adhe...
Flexible processing of complex curved sheet metal parts, with high cutting accuracy, fast speed, and...
Specially designed for seamless welding of precision plastic components, with a small heat affected ...
Medical device infusion set molds must comply with medical hygiene standards. Traditional spray coatings contain volatile impurities, which can easily contaminate infusion sets, and the coatings are prone to wear, resulting in rough mold cavity surfaces, burrs on infusion sets, and a service life of only 20000 to 30000 molds.
The Daokedao laser cladding equipment uses medical grade stainless steel powder, and the cladding layer meets the ISO 10993 medical standard with no risk of impurity contamination. The surface roughness of the coating Ra ≤ 0.2 μ m allows for the production of burr free infusion sets without the need for polishing, resulting in a threefold increase in wear resistance.
The service life of the repaired mold has been extended to 60000 to 70000 mold cycles, the qualification rate of infusion sets has increased by 18%, and the repair cost is only 1/4 of the new mold. After adopting this technology, a certain medical enterprise reduced the waste rate of infusion sets by 90%, fully meeting the requirements of medical hygiene.
