Laser Quenching equipment
Perform phase transformation hardening treatment on the metal surface to improve the hardness, wear ...
Perform phase transformation hardening treatment on the metal surface to improve the hardness, wear ...
Used for surface strengthening, repair, and remanufacturing of components, the coating has high adhe...
Flexible processing of complex curved sheet metal parts, with high cutting accuracy, fast speed, and...
Specially designed for seamless welding of precision plastic components, with a small heat affected ...
The transmission shaft and gear shaft of heavy-duty machinery need to have both high strength and high wear resistance. During traditional induction hardening, the depth of the hardened layer is only 2-3mm, and defects such as uneven hardened layer and cracking are prone to occur, which can lead to fatigue fracture under heavy load conditions.
The Daokedao laser cladding equipment provides a deep strengthening solution for heavy-duty shafts. The equipment can achieve the preparation of cladding layers with any thickness of 0.5-10mm, using high-strength alloy powder. The tensile strength of the cladding layer reaches over 1200MPa, and the depth of the quenched layer is three times that of induction hardening.
In heavy-duty equipment such as mine crushers and rolling mills, the reinforced shaft parts of Daokedao equipment have a fatigue life extended by four times and a fracture failure rate reduced by 80%. The characteristic of the cladding layer being "hard on the outside and tough on the inside" perfectly adapts to the usage requirements of heavy-duty impact conditions.
