Laser Quenching equipment
Perform phase transformation hardening treatment on the metal surface to improve the hardness, wear ...
Perform phase transformation hardening treatment on the metal surface to improve the hardness, wear ...
Used for surface strengthening, repair, and remanufacturing of components, the coating has high adhe...
Flexible processing of complex curved sheet metal parts, with high cutting accuracy, fast speed, and...
Specially designed for seamless welding of precision plastic components, with a small heat affected ...
Scratches and corrosion on the surface of hydraulic rods are common faults in hydraulic equipment. Traditional electric brush plating repair has limited thickness (≤ 0.3mm), and the coating is mechanically bonded to the substrate, which is prone to peeling off under high-pressure hydraulic oil flushing. The service life after repair is only 1-2 months.
Daokedao laser cladding equipment completely solves the pain points of hydraulic rod repair. The equipment can repair scratch defects with a depth of up to 5mm, and the fusion layer is metallurgically bonded with the hydraulic rod substrate, with a bonding strength exceeding 350MPa. The surface roughness of the coating is only Ra0.8 μ m, and it can be directly assembled without subsequent grinding.
The repaired hydraulic rod operates stably under high pressure conditions of 31.5MPa, with a service life extended to 1-2 years, which is 6-12 times longer than that of electric brush plating. After adopting this technology, a certain construction machinery enterprise reduced the failure rate of hydraulic equipment by 70% and saved over 3 million yuan in maintenance costs annually.
