Laser Quenching equipment
Perform phase transformation hardening treatment on the metal surface to improve the hardness, wear ...
Perform phase transformation hardening treatment on the metal surface to improve the hardness, wear ...
Used for surface strengthening, repair, and remanufacturing of components, the coating has high adhe...
Flexible processing of complex curved sheet metal parts, with high cutting accuracy, fast speed, and...
Specially designed for seamless welding of precision plastic components, with a small heat affected ...
The metal saw blade edge is prone to wear, leading to a decrease in cutting efficiency and excessive burrs on the cut. The replacement cycle is only 1-2 weeks. Daokedao adopts WC Co alloy cladding technology to form a 0.3mm thick coating on the blade edge, with a hardness of HRC65, a 4-fold increase in wear resistance, a 30% increase in sawing speed, and a 90% reduction in cutting burrs. The cost of strengthening a Φ 300mm metal saw blade is 300 yuan, and its lifespan has been extended to 8-10 weeks. After its application in a steel processing plant, the frequency of saw blade replacement has been reduced from 4 times per month to 1 time, saving 120000 yuan in annual saw blade costs. The roughness of the steel cutting edge has been reduced from Ra1.6 μ m to Ra0.8 μ m, and the scrap rate has been reduced from 10% to 0.5%. This solution is suitable for metal sawing such as stainless steel and carbon steel, and supports different types of saw blade reinforcement such as circular saw blades and band saw blades. The reinforced saw blades can be repaired 2-3 times repeatedly.
