Laser Quenching equipment
Perform phase transformation hardening treatment on the metal surface to improve the hardness, wear ...
Perform phase transformation hardening treatment on the metal surface to improve the hardness, wear ...
Used for surface strengthening, repair, and remanufacturing of components, the coating has high adhe...
Flexible processing of complex curved sheet metal parts, with high cutting accuracy, fast speed, and...
Specially designed for seamless welding of precision plastic components, with a small heat affected ...
After the vacuum forming mold suction hole is blocked or worn, the vacuum degree decreases, resulting in loose fitting of the product, wrinkles, and missing materials, with a scrap rate of over 18%. Daokedao adopts a laser drilling+cladding composite process to clean the blockage of the suction hole and then melt a wear-resistant coating on the hole wall. The diameter tolerance of the suction hole is ± 0.01mm, and the ventilation efficiency is improved by 30%. Special processes are pre-set for different aperture sizes (0.3-2mm) to ensure uniform distribution of suction holes. After being applied in a certain vacuum packaging factory, the product scrap rate decreased to 3%, the vacuum forming time was shortened from 15 seconds to 10 seconds, the single shift output increased by 33%, and the suction hole maintenance cycle was extended from 1 week to 2 months.
