Laser Quenching equipment
Perform phase transformation hardening treatment on the metal surface to improve the hardness, wear ...
Perform phase transformation hardening treatment on the metal surface to improve the hardness, wear ...
Used for surface strengthening, repair, and remanufacturing of components, the coating has high adhe...
Flexible processing of complex curved sheet metal parts, with high cutting accuracy, fast speed, and...
Specially designed for seamless welding of precision plastic components, with a small heat affected ...
Foam mold (EPS mold) is prone to appear foam adhering to the cavity during production, and it is necessary to spray release agent to cause product surface pollution. Daokedao adopts PTFE composite cladding technology, the friction coefficient of the cavity surface is reduced to 0.07, realizing smooth demoulding without release agent, and the surface cleanliness of foam products is improved by 1 level. The thickness of the cladding layer is 0.03-0.05mm, which does not affect the dimensional accuracy of the mold and increases the demolding efficiency by 40%. For the complex patterns of foam molds, the equipment adopts fine spot cladding to ensure the integrity of pattern details. After the repair, the service life of the mold was extended from 30000 to 80000 pieces, the cost of release agent was saved by 100%, and the product qualification rate was increased from 95% to 99.3%, which was suitable for foam packaging, thermal insulation materials and other production.
