Laser Quenching equipment
Perform phase transformation hardening treatment on the metal surface to improve the hardness, wear ...
Perform phase transformation hardening treatment on the metal surface to improve the hardness, wear ...
Used for surface strengthening, repair, and remanufacturing of components, the coating has high adhe...
Flexible processing of complex curved sheet metal parts, with high cutting accuracy, fast speed, and...
Specially designed for seamless welding of precision plastic components, with a small heat affected ...
The blades of the induced draft fan in power plants are used in sulfur-containing flue gas and high humidity environments. Blades made of 15MnV material often experience corrosion thinning and wear failure after running for 3000-5000 hours. Nickel based WC composite coating with WC content of 30% -35% and particle size of 45-75 μ m was prepared on the surface of the blade using Dokdo laser cladding technology. By optimizing the laser parameters (power density of 3.5 × 10 ⁴ W/cm ², scanning speed of 8mm/s), ensure uniform distribution of WC particles without burning. The obtained composite coating has a hardness of HRC58 or higher, and its corrosion and wear resistance in dusty flue gas is 5-8 times that of the substrate material, extending the service life of the blades from 6-8 months to 2-3 years and significantly reducing the number of power plant shutdowns and maintenance.
